Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, SODIMM Memory

Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, SODIMM Memory

Compare

19.52 incl. Vat

11 in stock

SKU: D4SO4G26KVR19 Category: Tag:

Description

ValueRAM’s KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.
 
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for
  • data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 8 internal banks; 2 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8
  • via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.18″ (30.00mm)
  • RoHS Compliant and Halogen-Free

 

Description

Specification

  • Series: Kingston ValueRAM
  • DDR Type: DDR4 SODIMM
  • Size: 1 x 4GB
  • #Hide#Individual Module Size: 4GB
  • Speed: 2666 MHz
  • Compliance: PC4-21300
  • Pins: 260-pin
  • CAS Latency: 19-19-19
  • Data Integrity Check: Non-ECC
  • Voltage: 1.2V
  • Additional Information: See Overview
  • Package Type: Retail
  • Package Weight: 0.0225 kg
  • Warranty: Lifetime

Additional information

Weight 0.0225 kg
EAN