Antec Performance 1 FT ARGB Gaming Case w/ Glass Side, E-ATX, 4 ARGB Fans & Hub, CPU/GPU Temp Display, iUnity Monitoring Software, USB-C, Black

Antec Performance 1 FT ARGB Gaming Case w/ Glass Side, E-ATX, 4 ARGB Fans & Hub, CPU/GPU Temp Display, iUnity Monitoring Software, USB-C, Black

Add to wishlist
Compare

Antec Performance 1 FT ARGB Gaming Case w/ Glass Side, E-ATX, 4 ARGB Fans & Hub, CPU/GPU Temp Display, iUnity Monitoring Software, USB-C, Black

Add to wishlist
Compare

€199.04 incl. Vat

5 in stock

SKU: CAA-ANTPERFORM1ARGB Categories: , , Tag:

Description

Full Tower E-ATX Highly Compatible Gaming Case w/ 4x ARGB Fans

  • CPU/GPU Temperature Display
  • Antec iUnity Software for instant data on PC specs
  • USB Type-C (10Gbps) 
  • 4mm Tempered Glass Side Panel
  • 4x 140mm Tranquil ARGB PWM fans
  • Airflow-enhancing Mesh Front Panel
  • Supports RTX 40 Series Graphics Cards
  • Thoughtful Design Features
  • Modular Drive Trays

CPU/GPU Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

 
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
 
Attention: The Antec iUinity software must be installed.
 
 
 
 
Antec iUnity 
 
The Antec iUnity Software provides instant data on PC specs, loads, and usage.
 

 

I/O Panel 
  • Including the mainstream USB Type-C (10Gbps) port for high-speed transfer
  • Included dust plugs for dust prevention.
  • Mic/Audio 2-in-1 port
 
 
 
4mm tempered glass & perforated solid steel
Left panel adopts tempered glass for better PC showcase visual effects.
Right solid panel is bottom-perforated to enhance heat dissipation and ventilation..
 
 

 

Cable Management On Point 
 
Spacious cable management for efficient wire organization.
 
There are ten sets of velcro straps for easy cable management:
 
 – Three sets of velcro straps for fan & I/O cable routing
 – Five velcro straps for hardware and power supply cables
 – Two velcro straps at the rear for rear I/O cable routing.
 
 
 

Pre-installed 4 x Tranquil Silent ARGB Fans

  • 3 x 140mm Tranquil ARGB PWM fans in front
  • 1 x 120mm Tranquil ARGB PWM fan in rear
Unique fan blade and frame design offers powerful airflow with low noise accomplished.
 
 
 
 
Exquisite Craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
 
 

Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.

Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.

 

Best Airflow Path For GPU Cooling 
 
Airflow-enhancing mesh front panel provides massive air.
 
Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.
 
 

 

Dust Filters
  • Top: Magnetic dust filter
  • Front: Magnetic & clip-on dust filter
  • Bottom: Full-sized pull-out dust filter
  • Side: Magnetic dust filter
 
 

 

Supports RTX 40 Series Graphics Cards 
 
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
 
 
 
 
 
Thoughtful Design
  • Stud for Fixing – The stud for fixing design provides a more convenient PC-DIY experience. 
  • Back-Mounted PSU Bracket – For easy installation. 
  • Drop-Proof Bolt – The drop-proof hook design avoids side panel damage. 
  • Rubber Grommets – 4 included rubber grommets for cable routing. 
  • 8 x Fully Open PCIe Slots – Bridgeless design supports vertical GPU installation. 
  • Rear Velcro Straps – For the rear I/O cable routing.
 
 
 
 
Best Cooling Design 
  • Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm)
  • Supports 360mm radiators at the front and top simultaneously
  • Up to 10 fans simultaneously
 
 
 
 
Modular Drive Trays 
Supports up to 5 drives: 2 removable drive trays for 3.5″ HDD/2.5″ SSD & 3 drive trays for 2.5″ SSD
 
 
 

Description

Specification

  • Form Factor: E-ATX
  • #Hide#Small Form Factor: No
  • Power Supply Wattage: No PSU
  • Motherboard Support: “E-ATX up to 285mm, ATX, Micro ATX, Mini ITX”
  • #Hide#Window(s): Yes (Window)
  • #Hide#LED Lighting: Yes (LED Lighting)
  • Connectors / Controls: 1 x USB 10Gbps Type-C
    2 x USB 3.0
    Headphone/Mic Combo Jack
    Temp. Display Switch
    Power Button
    Reset Button
  • Drive Bays: 3 x 2.5″”
    2/2 x 3.5″”/2.5″” Drive Mounts
  • Expansion Slots: 8 Expansion Slots
  • Cooling System: Included :
    Front: 3 x 140mm Tranquil ARGB PWM fans
    Rear: 1 x 120mm Tranquil ARGB PWM fan
    Built-in ARGB & PWM fan control hub

    Fan Mounts:
    Front: 3 x 120 / 3 x 140 mm
    Top: 3 x 120 / 3 x 140 mm
    Rear: 1 x 120 mm
    PSU Shroud: 3 x 120 mm

  • .:
    Radiator Options:
    Front: Up to 420 mm
    Top: Up to 360 mm
    Rear: 120 mm
  • Colour: Black
  • Material: Steel & Plastic
    4mm Tempered Glass Right Side
  • Compatibility: GPU max length:
    400 mm

    CPU cooler max height:
    175 mm

    PSU max length:
    245 mm (with HDD)
    440 mm (without HDD)

  • Weight/Dimensions: 13.04 kg
    (DxWxH) 522 x 230 x 522 cm
  • Additional Features: See Overview
  • Package Weight: 15.3000 kg
  • Warranty: 2 Years

Additional information

Weight 15.3000 kg
EAN

Related products